Classic tenders ::
Get complete information related to latest accelerated-weather-tester Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic India tenders, private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding accelerated-weather-tester Tenders.
Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :21056937 c-icon03 Jul, 2021 Tender Value : NA
l-iconSrinagar - Jammu And Kashmir Tender For procurement of testing equipements digital microscope. microscope & ends counting equipment. 5x, 10x, 20x, 40x & 100x lenses trinocular biological microscope with fibre cross section kit, high resolution ccd camera and imaging software with measurement facilities. ? scope of use : cross section of fibre or yarn, analysis of any fibre, yarn and fabric. ? range: 5x, 10x, 20x, 40x & 100x lenses / total magnification required : 1000x ? focus: adjustable ? lights: white, blue, yellow upper & lower ? supply: 240 volt ac supply direct count balance it should have following specifications: ? consists of an electronic balance 220 grams x 0.001 grams with internal and external custom software which calculates yarn, sliver and roving count along with number of tests, average value, cv % and standard deviation. other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided electronic twist tester it should have following specifications: ?automatic motorized double yarn twist tester with auto stop. ?having digital counter meter with and adjustable page 17 of 29 iict/tender/document/2020-21 pretension mechanism ? to analyze both s and z type of twist. ?adjustable test length 1 to 50 cm other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided shade card winding machine it should have following specifications: ?completely automatic, with digital display. ? single geared motor with traverse mechanism. ? 10 bobbin at a time can be used. ? provided with stand to accommodate 10 baby cones. ?has digital counter to set the number of rotations ?rust proof coating ? at least 500 empty cards shall be provided other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided universal tensile strength tester to determine tensile strength and elongation of fabric, carpet and thread as per cre principle . it should have following specifications: instrument detail : the instrument should be digital with window based software having automatic control of unit, user friendly interface and presentation of test reports together with data storage and retrieval with following features - capacity -20 kn type of loading : axial load cell capacity 20 kn measuring range 20 n to 18 kn as per din en iso 7500 accuracy of load cells : both 0.5 % & 1% as per din en iso 7500-1 breaking force of load cell : 300 % of the maximum load capacity of the load cell digital servo drive system page 18 of 29 iict/tender/document/2020-21 speed of the machine : 0.001 mm/min to 500 mm/min step less variable safety features : in built protection / control in the machine for following conditions - load cell overall protection via software limit switch - both hardware & software limit switch for over travel of traversing crosshead in both direction up & down - automatic stopping & return of the machine to the original position with a click of a button - emergency switch - suitable grips for testing of fabric, carpet and thread strength : test software : window based software for testing, data acquisition and representation of result for cre tests .the software should have following featureso preparation of test o carrying out of test o full statistical analysis o real time graphical display o real time test results o data acquisition accessories required: all standard accessories reference standards : astm d 2256, astm d 5034 / is 1969 other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided motorized digital wrap reel it should have following specifications: ? digital panel with resettable revolution counter and auto stop. ? supplied with a wheel of 1 meter or 1.5 yards perimeter with support creels / bobbin holding stand to accommodate bobbins up to 100mm. page 19 of 29 iict/tender/document/2020-21 ? adjustable double bar yarn tensioner and yarn guides ? five leas can be made together min ? complete with all accessories, 5-station yarn package stand and collapsible swift. other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provide motorized yarn appearance board winder instrument consists of a yarn wrap board. the board is rotated automatically to wrap yarn over it .the yarn is guided on to the board through a yarn guide, which moves parallel to the pivoting axis of the board giving uniformly spaced wraps . the guide is positively linked to the rotation of the board with the help of a chain and sprocket drive. a set of change gears gives six different spacing to the yarn for wrapping yarn of different counts. a spring loaded adjustable tensioning arrangements provide the desired tension to the yarn. a specially designed bobbin holder provides holding of yarn bobbin to check. testing is carried out as per astm d 2255. it should have following specifications: specification: instrument should be built on rigid heavy base with standard finish. instrument and its all components should be corrosion resistant. traverse speed option for yarn wrapped @ 20, 22, 26, 32, 38, & 48 ends per inch . size of acrylic tapered board : 28.5 cm x 18 cm, taper angle 2 degree 28.5 cm x 16 cm size acrylic rectangular board : 28.5 cm x 18 cm standard yarn spacing : 20, 22, 26, 32, 38, and 48 wraps per inch accessories required : pointing needle 04 sets of tapered and rectangular boards each both white and black boards are required. one complete set of photographic standards for yarn grading in compliance with astm d 2255 range –ne 1-12, ne 12-24, ne 24-36, ne 36-50, ne 50-75, ne 75-135 in std size 25 x15 inch other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided laundro-meter the instrument should conform to is/iso 105 c10/ aatcc-61 page 20 of 29 iict/tender/document/2020-21 standards/is 105 c06. it should have following specifications: ? it should handle both 08 numbers of 500ml capacity canisters pots or 04 numbers 1200ml capacity canisters pots in the same machine. ? temperature range: it should meet the requirement of is/iso 105 c10 e5 of 95±20 c ? number of stainless steel canister :08 numbers with capacity 500 ml and 04 numbers with capacity 1200 ml ? stainless steel ball 6 mm diameter:100 numbers ? stainless steel disc: 25 numbers as per aatcc metod ? carriage rpm :40±2 ? corrosion resistant body with inner chamber and top cover shall be of stainless steel and ? multifibre test fabric as per is/iso and aatcc method: 50 meter ? gray scale of change in shade and staining as per iso and aatcc standard other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided crock meter the instrument should conform to is: 766/ aatcc-8/iso x-12 standards. it should have following specifications: ? diameter of the rubbing finger : 16 mm & 25 mm ? load on the finger : 9 n & 20 n ? length of the traverse : 100 ±5 mm ? counter re-settable : 4-digit counter ? rubbing cloths: 500 pieces ? motor driven auto stop other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided pile thickness guage electronic hand operated micrometer with following specifications : ? measuring range : 0-30 mm ? accuracy : 0.02 mm ? head diameter pressure foot : 12 mm ? lower plate diameteranvil:50mm&75mm interchangeable ? test pressure : 0.5, 1, 2, 5, 10 & 20 kpapage 21 of 29 iict/tender/document/2020-21 other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided moisture meter it should have following specifications: ? supplied with 3 probes for fiber, yarn and fabric, blend conversion charts and carrying case interchangeable electrodes suitable for cones, hanks, bales and fabric ? high frequency resistance measurement ? measuring accuracy : + 0.1 % ? with calibration unit other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided tuft withdrawl tester it should have following specifications: ? micro-computer control, large lcd display, automatic data processing. ? professional carpet tufting clamp. ? maximum load range 120n ? power supply ac220v+ 10%, 50hz other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided gsm cutter it should have following specifications: ? cutting area: 100 cm². ? cutting depth: 5 mm. model with 4 blades. ? equipped with one cork support plate and four spare blades. ? dimensions: l 170 x w 170 x h 150 mm other requirements: page 22 of 29 iict/tender/document/2020-21 all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided electronic weighing balance it should have following specifications: ? weighing capacity 250 g and accuracy : 0.001 g ? digital reading lcd display ? rs 232 port ? pan size : 12 cm ? sealed housing ? auto calibration other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided industrial heater press it should have following specifications: ? laboratory model with press head size approximately 2.5 inch x 2.5 inch ? for label fusing purpose on carpet ? digital temperature control ? digital timer ? adjustable pneumatic pressure other requirements: all accessories as required pl provide list of the accessories with technical bid note: calibration certificate should be provided magnetic stirrer with hotplate it should have following specifications: ? max speed -1200 rpm ? stirring capacity – 2 ltr ? heating capacity – 300 watt ? solid state electronic speed controller: 1 no ? display – digital ? teflon coated paddle dimension - 9×35 mmpage 23 of 29 iict/tender/document/2020-21 ? totally enclosed unit. designed for use even in corrosive atmosphere and portable ? set - up plate material- stainless steel ? stir bar length -25 mm other requirements: all accessories as required pl provide list of the accessories with technical bid .note: calibration certificate should be provided for upgradation of laboratory
 Loading, Please wait...

Connect us via What's Up