Classic tenders ::
Get complete information related to latest acsr-conductor-repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic India tenders, private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding acsr-conductor-repair Tenders.
Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

corporations/Associations/Others

CTN :21088618 c-icon19 Jun, 2021 Tender Value : NA
l-iconNoida - Uttar Pradesh Tender For contract for emergency breakdown attend work repairing of broken/badly damaged s.t poles damaged at ground level in existing h.t/l.t lines due to extra ordinary rusting & scaling. from bottom side welding of 4/5 pieces approx 75 cm. long of angle iron of size 50x50x6 mm. ist of all digging of pit around the pole of size 1.0 mtr. x 1.0 mtr. x 1.0 mtr. is to be done and then cleaning of rust & de-scaling with the help of hard wire brush & chisel and then ms angle iron of size 50x50x6 mm in 4/5 pcs. of required length as per site requirement varying from 70 cms to 75 cm to cut down and then to be welded with the healthy top and bottom portion of the pole with ist class electric welding with own welding generator set in such as way that on top of bottom potion over-lapping of healthy part is covered 200 mm length approx. before welding the poles where top & bottom portion are separated, the same are to be kept in alignment safely & after completing the above work, the pit should be refilled. concreting of s.t pole for grouting 0.285 cu mt. cement, stone blast making plinth of above repaired st pole in round shape of height 0.30 meters from ground level having outer dia of 500 mm size in cc 1:3:6 in cement, sand, stone ballast with digging of pit of damaged pole in pakka road hard soil & kacha road soft soil with the help of road cutter/digging machine, tractor etc. strengthing and labelling of old damaged 8.50mtr pcc/11 mtr st poles with dismentaling all accessories and re-installed all line accessories, connected connection all new line accessories with comissioning the line. single supports on new st pole of 11 mtr. long / 8.5mtr. pcc pole with making connection complete in all respect with commission of line. grouting, concreting and plinthing of single support and damaged old st/pcc pole of 11/8.5 mtr. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect as per respo schedule. dismentaling and removal of damaged acsr different types of ht/lt conductor and l.t. abc lines from both side spans of damaged pole and removal of line accessories safely from damaged pole in different sectors with making bundles in coil shape including both side loading and unloading from work site to je store. re-laying lifting, stringing & proper sagging of new conductor and abc cable in place of old and damaged removed abc and conductor on h.t/l.t line with binding, jumpering with complete connections in all respect as per respo norms. carriage of new 8.5mt. long pcc pole, 11 mtr. long stp and distribution box single phase/three phase and various type of new conductor and lt lines cable and other required line material in a 24 feets vehicle/full lenght truck from central store, shaibabad/sector 20, noida/j.e store to work site including safe loading and unloading at both ends.

corporations/Associations/Others

CTN :21088591 c-icon17 Jun, 2021 Tender Value : NA
l-iconLucknow - Uttar Pradesh Tender For construction of electrical infrastructure for release of against sanction load to the new consumer’s and other associated works, at 33/11 kv ocr & abott road under deposit head safe carriage, loading-unloading with proper stacking of following material from esc-daliganj to work site/je -dump store – a 11kv 3x70/120/185 sq mm xlpe cable b11 kv st/th c/j kit 3x70/120/185 sq mm c 11kv end termination o/door & i/door 3x70/120/185 sq mm d st pole 9/11 mt long e m s earthing rod 20x2500 mm f top chanel 125x65mm g abc 3x120+1x95+1x16 h abc 3x95+1x70+1x16 i abc single phase 1x16+1x25 j 3.5x240/400/70 sq mm pvc cable k 11/0.4 kv 250/400 kva t/f l 11/0.4 kv 100 kva t/f m 11/0.4 kv 63 kva t/f n 11/0.4 kv 25 kva t/f o gi wire 8 swg p top chanel 100x50mm q 11kv pin insulator r 11kv pin with nut s stay set 16x1800 mm t stay wire u m.s. angle iron 65x65x6mm v 11 kv rmu w 11 kv meter cubicle x 11 kv ct & pt unit fabrication & erection of 11 kv cable exposure type double pole with the provission of cable with fixing of necesory clamps and other acessories like danger board, number plate, barbed wire, 2 no. channels 100x50 mm 1600mm each, 1 no.ms channel 100x50mm3200mm in length for supporting the hoisting of cable & poles.its jumpering by single core pvc aluminium cable with proper size al.lug after making three phase busbar with help of 11 kv pin, pin insulator and pvc cable. all material arranged by contractor except steel, pole, pvc aluminium cable & insulator.as per respo norms. fabrication & erection of s/s type double pole for 11kv line on 11 m long st pole with fixing of necessary clamps & other acessories like 1 no. top channel 100×50 mm, 2 no.ms angle 65x65x6mm, danger board, number plate, barbed wire, tpmo set & d.o.fuse set. double circuit cable laying in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks all the material required for laying will be supplied by the contractor except 11 kv xlpe cable s/c cable laying in normal soil by digging of trench 900 mm deep, 500 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. all the material required for laying will be supplied by the contractor except 11 kv xlpe cable cable laying by dirll method single circuit laying in rcc hume pipe with coller np-4 200 mm dia single circuit. in ms pipe 4 dia single circuit. in hdpe pipe 160 mm dia laying of 11 kv xlpe cable in hdpe pipe 160 mm dia by horizontal deep drilling method hoisting of 11kv xlpe cable3x70/120/185 sq mm on double pole with ms pipe 2 m long including its jumpering complete with clamps, nuts and boltsall material arranged by contractor. digging of pit of size 3x2x1 mtr. for making straight through joint 11 kv size 3x/70185/120 sq mm work included boxing of pit by the help of sand, bricks and stone slab filling of soil leveling and ramming of the same . s/th provided by department high pressure testing of 11 kv xlpe cable. testing equipment will be arranged by the contractor. placement of 11/0.4 kv t/fs on s/s type d/p & installation, commissioning of 400/250/100/63/25/ kva t/f jumpering with the system all the required matrial for above job shall be provided by contractor except t/fs chemical earthing system with outer pipe diameter 50mm, inner strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 kgas per required of bfc which should be capable to reducing the soil resistively with good moisture retaining capacity.specification of chemical earthing and drawing is hereby enclosed. all material shall by supply by the contractor. laying of lt pvc cable 3.5x240/3.5x400/3.5x70 sq mm single circuit in 900 mm deep, 500 mm wide including supply of required material as fine sand, 1st class bricks, stone slab except lt pvc cable laying in rcc hume pipe with coller np-4 200 mm dia single circuit. in ms pipe 4 dia single circuit. construction of t/f plinth of size 2x2x1.5 m on a padding 0.25m deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter.two no. of channel 100x50 in length 1500mm will be grouded.0.35 cm.rcc will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.the t/fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. all the material will be arranged by the contractor . placement of 11/0.4 kv t/fs from dump place to newly constructed t/fs plinth & installation, commissioning of 400/250/100/63/25 kva t/fs of t/f plinth and including jumpering with the system all the required matrial for above job shall be provided by contractor except t/fs construction of retaining wall, fabrication & erection of wire mesh fencing around transformer and distribution pillar box with retaining wall & 1 no. gate with locking arrangement made of ms angle iron of size 50x50x6 mm jointed with nuts and bolts. the panel must be supported with ms flat of size 50x6 mm. wiremesh of size 10 swg rectangle type, its painting as per norms of resspo. all the material will be arranged by the contractor at his own cost. construction of massonary type distribution pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and ms round bar of 10 mm dia including straight ms angle 50x50x6x750 mm- all the material will be arranged by the contractor. suppy & fixing of henless fuse unit 500 amp 650 volts hoisting, winding and jumpering of of lt cable size 3.5x240 sq mm between lt distribution box/fuse unit & constructed overhead line with proper lugging and clamping providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthingearthing rod & earthing strip arranged by contractor. opening of consumer connection from existing line again reconnection with newly ercted l.t. distribution box/pillar box. 3 phase cable provided by contractor single phase cable provided by contractor fabrication & erection of single pole for lt line on 09 m long st pole with fixing of necessary clamps & other acessories like clamp hook, dead/suspension clamp, neutral clamp, abc pressure clamp if required and danger board with clamp.all material arranged by contractor except steel & pole if required. stringing, sagging, winding and jumpering of lt line with ab cable 3x120+1x95+1x16 conductor as per resspo norms.ab cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor . stringing, sagging, winding and jumpering of lt line with ab cable 3x95+1x70+1x16 conductor as per resspo norms.ab cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor . stringing, sagging, winding and jumpering of lt line with single phase ab cable 1x16+1x25 conductor as per resspo norms.ab cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor . supply and fixing of lt distribution box 3 phase 4 wire on existing wall/ pole support with proper clamping of flexible pipe for casing of cable at suitable place for giving supply. nozeling, winding & grouting of stay set. all the civil material & stay set will be arranged by the contractor except stay wire. fixing of earth rod 2500x20mm as per norms. for earthing support of old existing poles of lt lines including 6 swg gi/earth wire . all materials provided by contractor digging of pit in kachcha/pakka land in depth upto 1/6 length of pole, dragging of stp from near by place/dump, erection of single pole along with stone pad in bottom with proper alignment of line for 11 kv line on 11 m long st pole and refilling with ramming of earth. grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast as per respo norms. construction of pole plinth 300mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per respo norms. painting of new erected st pole with two coat of red oxide paint, po red paint at top of pole 2 m & balance by two coats of best quality aluminium paint isi of burger/nerolac/asian mark as per norms. making of circuits taping of line installation and commissioning of ct/pt metering unit including its connection in between tvm meter and ct/pt unit with required size of copper cable. cable will be arranged by the contractor as his own cost. fixing of metering cubicle. installation of rmu including grouting & plinthing supply & fixing of cu l-piece supply of copper stripe of size 50x50x6 mm supply & fixing of 11 kv tpmo dismentling of 11kv line, l.t. lines & distribution boxes and its dump at suitable place on site up to complition of work and its safe loading/unloading/weighing carriage from dump site to jes store/esc daliganj except broken pcc pole. st pole 11 mt long steel scrap of st pole 11/.4 kv t/f 250/400/630 kva 11/.4 kv t/f 25/63/100 kva acsr mix conductor steel material tree branches cutting and chopping where required

State Government

CTN :21087917 c-icon17 Jun, 2021 Tender Value : NA
l-iconJammu - Jammu And Kashmir Tender For supply of electrical items and hardware items 33 kv & 11 kv cable kits indoor/outdoor make hot set or any other reputed make conforming to relevant is specifications raychem, 3m, densen or equivalent a cable kits 33 kv single core heat shrinkable indoor 630 mm2 b cable kits 33 kv single core heat shrinkable indoor 300 mm2 c cable kits 33 kv single core heat shrinkable outdoor 630 mm2 d cable kits 33 kv single core heat shrinkable outdoor 300 mm2 e cable kits 11 kv single core heat shrinkable indoor 630 mm2 f cable kits 11 kv single core heat shrinkable outdoor 630 mm2 g cable kits 11 kv 3 core heat shrinkable indoor 400 mm2 h cable kits 11 kv 3 core heat shrinkable indoor 300 mm2 i cable kits 11 kv 3 core heat shrinkable indoor 240 mm2 j cable kits 11 kv 3 core heat shrinkable indoor 185 mm2 k cable kits 11 kv 3 core heat shrinkable indoor 120 mm2 l cable kits 11 kv 3 core heat shrinkable outdoor 400 mm2 m cable kits 11 kv 3 core heat shrinkable outdoor 300 mm2 n cable kits 11 kv 3 core heat shrinkable outdoor 240 mm2 o cable kits 11 kv 3 core heat shrinkable outdoor 185 mm2 p cable kits 11 kv 3 core heat shrinkable outdoor 120 mm2 q cable kits 11 kv 3 core straight through joining, heat shrinkable 185 mm2 r cable kits 11 kv 3 core straight through joining, heat shrinkable 300 mm2 s cable kits 11 kv 3 core straight through joining, heat shrinkable 400 mm2 t cable kits 11 kv single core straight through joining, heat shrinkable 630 mm2 u cable kits 33 kv single core straight through joining, heat shrinkable 630 mm2 spares for 33 kv c&r panels and 11 kv vcb/ocb panel banks. a inner baffle for 33 kv mocb bhel c grid spout assembly suitable for 11 kv ocb panel bhel make d grid spout assembly suitable for 11 kv ocb panel bicco lawrie make e grid spout assembly suitable for 11 kv ocb panel crompton greaves make f trolly copper bushing rod suitable for11 kv ocb panel ssg make parma wood/crompton greaves make g male contact for 11 kv ocb bicco lawrie make copper with silver coating 11 ocb panel h male contact for 11 kv ocb s.s.g make top tip of iron with silver coating i male contact for 11 kv ocb crompton greaves make with silver coating j male contact for 11 kv ocb bhel make with silver coating j male contact for ocb mei make with silver coating k female contact for 11 kv ocb bicco lawrie make with silver coating l female contact for 11 kv ocb s.s.g make with silver coating m female contact for 11 kv ocb cromption greaves make with silver coating n female contact for 11 kv ocb bhel make with silver coating o trip bridge assembly bl p roller assembly bl q female contact for 11 kv ocb mei make with silver coating r 11 kv pt fuse s 11 kv vcb bottle assembly bracket t shower contact mei make u shower contact crompton greaves make v arc pot mei make w tripping coil suitable for 33 kv and 11 kv ocb / vcb panels operating voltage 30-36 volt dc x tripping coil for 66 kv ocb / vcb panels 11 kv cts of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv ocb/ vcb panels i 800/400/5-5 ii 750/375/5-5 iii 600/300/5-5 iv 400/200/5-5 v 300/150/5-5 vi 150/75/5-5 spares for power transformers a breather for 6.3 mva 33/11 kv transformer 2 kg b breather for 10 mva 33/11 kv transformer 3 kg c breather for 5 mva 33/11 kv transformer 2 kg c breather for 5 mva 66/11 kv transformer 3 kg c breather for 6.3 mva 66/11 kv transformer 3 kg c breather for 10 mva 66/11 kv transformer 3 kg d 20 mm lt bush rod for 33/11 kv transformer e 12 mm lt bush rod for 33/11 kv transformer f 20 mm copper bush rod assembly for 33/11 kv, 10 mva power transformer with oil seal g silica gel h oil seal for 33/11 kv power transformer i adaptor for bush rod extension for 33/11 kv power transformers oil temperature indicator 6-inch dia winding temperature indicator 6-inch dia relays a numerical relay 3-pole 24-50 v 2 o/c and 1 e/f relay mit 103/asida b master trip relay 24-50 v, b-24 c master trip relay ashida make 18-52 v d ashida numerical relay 2 o/c & 1 e/f 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification a 33 kv pin insulator with pins porcelain type b 33kv pin insulators for panther conductor with pins polymer type with base pin 25 mm c 33kv pin insulators for wolf conductor with pins polymer type with base pin 25 mm d 33kv pin insulators for dog conductor with pins polymer type e 33 kv g.i. pins f 11 kv pin insulator polymer type with pins g 11 kv pin insulator porcelain type with pins h 11 kv g.i. pins i 11 kv disc insulator b & s type 70 kn porcelain type j 33kv disc insulators polymer type k 33 kv post insulator l 22 kv post insulator m 11 kv post insulator n drive insulator of sorts o 11 kv guy insulator p 33 kv guy insulator 33 kv tension fittings for acsr dog conductor, b&s 3 u-bolts type approx. 2.8 kg 33 kv tension fittings for acsr wolf conductor, b&s 4 u-bolts type approx. 3.8 kg 33 kv tension fittings for acsr panther conductor, b&s 4 u-bolts type approx. 4.6 kg 33 kv suspension fittings for acsr dog conductor 33 kv suspension fittings for acsr wolf conductor 33 kv suspension fittings for acsr panther conductor hardware & clamps for conductor a 33 kv isolator clamps for acsr dog conductor heavy duty b 33 kv isolator clamps for acsr wolf conductor heavy duty c 33 kv isolator clamps for acsr panther conductor heavy duty d 33 kv pt clamps for acsr panther conductor heavy duty e 33 kv pt clamps for acsr wolf conductor heavy duty f 33 kv pt clamps for acsr dog conductor heavy duty g 33 kv ct clamps for acsr panther conductor heavy duty h 33 kv ct clamps for acsr wolf conductorheavy duty i 33 kv ct clamps for acsr dog conductorheavy duty j 33 kv la clamp for acsr panther conductor heavy duty k 33 kv la clamp for acsr wolf conductor heavy duty l 33 kv la clamp for acsr dog conductor heavy duty m t-clamps for acsr panther conductor heavy duty n t-clamps for acsr wolf conductor heavy duty o t-clamps for acsr dog conductor heavy duty p pg clamps for panther conductor heavy duty q pg clamps for wolf conductor heavy duty r pg clamps for dog conductor heavy duty nuts & bolts 4/8, 5/8 & 6/8 dia of different lengths full threaded galvanized nuts & bolts of different lengths full threaded g.i. spring washers aluminium thimble 95mm2 aluminium thimble 120mm2 aluminium thimble 185mm2 aluminium thimble 240mm2 aluminium thimble 300mm2 aluminium thimble 400mm2 aluminium thimble 630mm2 paints make asian, burger, nerolac or any other reputed make conforming to relevant is specifications a aluminium paint b red oxide paint c black paint cold galvanizing compound cold galvanizing compound for anti corrosive galvanized protection to steel structure, dried flow of compound containing 95% metallic zinc m-seal welding rod 3.5 / 4 mm electrode pvc tape empire tape para plast compound earth wire guy wire 7/16 g.i. wire 8swg of sorts barbed wire manilla rope 1 inch thick manilla rope 1½ inch thick p.p. rope 1 inch thick p.p. rope 1½ inch thick emergency lights insulation rubber mat 1 m x 2m x 12mm thick rubber boots search light / dragon light with in built charging system hand gloves 33 kv safety belts of standard quality safety helmets of standard quality megger 5000 v tool kit complete with tool box drill bit 18/20/25/28mm i/c switch 200 amp fire extinguisher for electrical sub stations of relevant is specifications aco2 4.5 kg b power based abc type 4 kg. c power based abc type 6 kg. d power based abc type 9 kg. fire buckets with stand anti climbing device turn table aluminium jointing sleeve mid span compressor joint for panther conductor 11 kv isolators & 33 kv isolators a 11 kv isolator with earthing blade 630 amp polymer b 11 kv isolator without earthing blade 630 amp polymer c 33 kv isolator with earthing blade 1250 amp polymer d 33 kv isolator without earthing blade 1250 amp polymer e 11 kv isolator 600 amps with 25 ka breaking capacity double break type with complete manual operating mechanism. 11 kv hg set 11 kv do set 11 kv g.o set 11 kv link set with 50 mm copper strip 33 kv isolator jaws plate type heavy duty 33 kv isolator jaws pipe type heavy duty battery chargers & batery bank & ac / dc distribution board a 36 volts battery bank 100 ah, 2 v, 18 nos cells complete with all accessories b 30 amp manually operated battery charger. c maintenance free 30 v lead acid battery vrla bank comprising of 16 nos of 2 volt cells of 100 ah capacity d 30 v battery charger automatic float & boost compatible for vrla batteries e 30 volt, dc distribution board indoor type, floor mounted made out of 14/16 swg crc sheet, dust, vermin proof, duly powder coated and wired as per standard engineering practice f ac distribution board indoor type, floor mounted made out of 14/16 swg crc sheet, dust, vermin proof, duly powder coated and wired as per standard engineering practice lightening arrestors 10 ka, make oblum / raychem / rashtriya / adinath / or any other reputed make conforming to relevant is specifications, compatible strictly for safety of system a 11 kv l.a. set station type polymer make oblum / raychem / rashtriya / adinath / or any other reputed make conforming to relevant is specifications, compatible strictly for safety of system b 33 kv l.a. set station type polymer make oblum / raychem / rashtriya / adinath / or any other reputed make conforming to relevant is specifications, compatible strictly for safety of system c 11 kv l.a. set station type porcelain make oblum / raychem / rashtriya / adinath / or any other reputed make conforming to relevant is specifications, compatible strictly for safety of system d 33 kv l.a. set station type porcelain make oblum / raychem / rashtriya / adinath / or any other reputed make conforming to relevant is specifications, compatible strictly for safety of system control cable armoured a 2.5 mm2 cu 2-core b 2.5 mm2 cu 4-core c 2.5 mm2 cu 6-core d 2.5 mm2 cu 8-core e 2.5 mm2 cu 10-core f 2.5 mm2 cu 12-core g 2.5 mm2 cu 16-core control cable unarmoured a 2.5 mm2 cu 2-core b 2.5 mm2 cu 4-core c 2.5 mm2 cu 6-core d 2.5 mm2 cu 8-core e 2.5 mm2 cu 10-core f 2.5 mm2 cu 12-core g 2.5 mm2 cu 16-core 11 kv vacume interupter bottle 1200a a g.e.c. b crompton greaves c allind d alstrom e bhel /a.b.b 11 kv vacume interupter bottle 800a a g.e.c. b crompton greaves c allind d alstrom e bhel /a.b.b h.t. tape 33 kv xlpe power cable make havells or any other reputed make conforming to relevant is specifications a 33 kv single phase xlpe cable 630 mm2 b 11 kv single-core xlpe cable 630 mm2 c 11 kv 3-core xlpe cable 400 mm2 d 11 kv 3-core xlpe cable 300 mm2 e 11 kv 3-core xlpe cable 240 mm2 f 11 kv 3-core xlpe cable 185 mm2 g 11 kv 3-core xlpe cable 120 mm2 h 11 kv 3-core xlpe cable 95 mm2 twin core 16 mm2 pvc cable al pvc cable 3.5 core armoured x35 sqmm pvc cable 4 core armoured 16mm² 3.5 core lt cable 50 mm² armoured earthing material a charcoal b salt c g.i. plate 2x 2 d g.i. pipe 40 mm f 1½ e g.i. pipe 50 mm f 2 f g.i. strip 25x3 mm g g.i. strip 50x6 mm / 25x6 mm g.i. flat 50x6 mm / 50x8 mm aluminium bus bar strip 75x6 mm aluminium bus bar strip 100x10 mm copper bus bar 10mm /12 mm thick 11 kv danger plates with clamps 33 kv danger plates with clamps 66 kv danger plates with clamps mesh fence of different sizes g.i. mesh fence of different sizes transformer oil confirming to is-335-1993 with ammendments up to date 33 kv ct of different ratios 33 kv pt of different ratios 33 kv vcb 33 kv c&r transformer panel with differential protection 33 kv c&r line panel 66 kv ct of different ratios 66 kv pt of different ratios 66 kv la set 66 kv isolator set with earthing blades 66 kv isolator set without earthing blades 66 kv c&r transformer panel 66 kv c&r line panel acsr weasel conductor acsr rabbit conductor acsr tiger conductor acsr wolf conductor acsr panther conductor street light / yard light 100 watt street light / yard light 250 watt led bulbs 9w isi mark led bulbs 15w isi mark led bulbs 30w isi mark led bulbs 50w isi mark lifting & pulling machine capacity 5 ton to 8 ton safety chart 3x2 ft, laminated board

State Government

CTN :21087927 c-icon30 Jun, 2021 Tender Value : 30.00 Lacs
l-iconJammu - Jammu And Kashmir Tender For supply of electrical items and store hardware items 33 kv & 11 kv cable kits indoor/outdoor reputed make confirming to relevant is specifications a cable kits 33 kv single core heat shrinkable indoor 630 mm2 b cable kits 33 kv single core heat shrinkable indoor 300 mm2 c cable kits 33 kv single core heat shrinkable outdoor 630 mm2 d cable kits 33 kv single core heat shrinkable outdoor 300 mm2 e cable kits 11 kv single core heat shrinkable indoor 630 mm2 f cable kits 11 kv single core heat shrinkable outdoor 630 mm2 g cable kits 11 kv 3 core heat shrinkable indoor 400 mm2 l cable kits 11 kv 3 core heat shrinkable outdoor 400 mm2 h cable kits 11 kv 3 core heat shrinkable indoor 300 mm2 m cable kits 11 kv 3 core heat shrinkable outdoor 300 mm2 i cable kits 11 kv 3 core heat shrinkable indoor 240 mm2 n cable kits 11 kv 3 core heat shrinkable outdoor 240 mm2 j cable kits 11 kv 3 core heat shrinkable indoor 185 mm2 o cable kits 11 kv 3 core heat shrinkable outdoor 185 mm2 p cable kits 11 kv 3 core straight through joining heat shrinkable 185 mm2 q cable kits 11 kv 3 core straight through joining heat shrinkable 300 mm2 r cable kits 11 kv 3 core straight through joining heat shrinkable 400 mm2 s cable kits 11 kv 3 core straight through joining heat shrinkable 630 mm2 t cable kits 33 kv single core straight through joining heat shrinkable 630 mm2 t cable kits 33 kv single core straight through joining heat shrinkable 300 mm2 tripping coil 36 volt dc for 33/11 kv ocb / vcb panel tripping coil with plunger 11 kv pt fuse 11 kv cts of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstom for 11 kv ocb/ vcb panels/ schinder/stelmec/megawin/yamuna i 800/400/5-5 ii 750/375/5-5 iii 600/300/5-5 iv 400/200/5-5 v 300/150/5-5 vi 150/75/5-5 spares for power transformers a breather for 6.3 mva 33/11 kv transformer 2 kg ith silica gel b breather for 3.15 mva 33/11 kv transformer 2 kg with silica gel c breather for 10 mva 33/11 kv transformer 3 kg ith silica gel d 20 mm lt bush rod for 33/11 kv transformer e 12 mm lt bush rod for 33/11 kv transformer f metalic clamp 20 mm for power transformer 33 kv bush for 10 mva 33 kv bush for 6.3 mva 33 kv bush for 3.15 mva lv bush for 10 mva lv bush for 6.3 mva lv bush for 3.15 mva f power transformer bush clamp 20 mm g silica gel relays a numerical relay 3-pole 24-50 v 2 o/c and 1 e/f relay ashida adr-241a relays b numerical relay 3-pole 24-50 v 2 o/c and 1 e/f relay siemens 7sr: 2103 c master trip relay 24-50 v ashida make or alstom make d master trip relay ashida make 18-52 v e auxiliary relay 3 element ashida f auxiliary relay 3 element alstom 33 kv pin insulator make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification epoxy post insulator epoxy vaccum interrupter chamber for 11 kv vcb drive insulator 11 kv disc insulator b & s type 70 kn make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification 33 kv guy insulator 33 kv tension fittings for acsr dog conductor, b&s 3 u-bolts type 33 kv tension fittings for acsr wolf conductor, b&s 4 u-bolts type 33 kv tension fittings for acsr panther conductor, b&s 4 u-bolts type hardware & clamps for conductor 33 kv isolator clamps for acsr dog conductor 33 kv isolator clamps for acsr wolf conductor 33 kv isolator clamps for acsr panther conductor 33 kv pt clamps for acsr panther 33 kv pt clamps for acsr wolf 33 kv ct clamps for acsr panther 33 kv ct clamps for acsr wolf 33 kv la clamp for acsr panther 33 kv la clamp for acsr wolf t-clamps for acsr panther conductor heavy duty t-clamps for acsr wolf conductor heavy duty pg clamps for panther conductor heavy duty pg clamps for wolf conductor heavy duty 2/12, 2.5/12 nuts & bolts 4/8, 5/8 & 6/8 dia of different lengths full threaded galvanised nut & bolts aluminium thimble 185mm2 aluminium thimble 240mm2 aluminium thimble 300mm2 aluminium thimble 400mm2 aluminium thimble 630mm2 paints make asian, burger, nerolac or any other reputed make conforming to relevant is specifications a aluminium paint b red oxide paint c black paint m-seal welding rod 3.5 / 4 mm electrode pvc tape ht tape adhesive para plast compound guy wire 7/16 g.i. wire of sorts manilla rope 1 inch thick p.p. rope 1 inch thick emergency lights search light / dragon light with in built charging system safety belts of standard quality safety helmets of standard quality megger 5000 v tool kit complete drill bit 18/20/25mm i/c switch 200 amp fire extinguisher for electrical sub stations of relevant is specifications a. co2 4.5 kg b power based abc type 4 kg c power based abc type 6 kg d power based abc type 9 kg fire bucket with stand anti climbing device insulation rubber mat 1 m x 2m x 12mm thick hand gloves 33 kv 11 kv isolator with earthing blade 630 amp polymer 11 kv isolator without earthing blade 630 amp polymer 11 kv hg set 11 kv link set 11 kv do set 33 kv isolator with earthing blade 1200 amp polymer 33 kv isolator without earthing blade 1200 amp polymer 11 kv g.o set a 36 volts battery bank 100 ah, 2 v, 18 nos cells complete with all accessories b maintenance free 36 v lead acid battery vrla bank comprising of 18 nos of 2 volt cells of 100 ah capacity c 2 v battery cells lead acid battery cell 30 amp manually operated battery charger. 30 v battery charger automatic float & boost compatible for vrla batteries 30 volt, dc distribution board indoor type, floor mounted made out of 14/16 swg crc sheet, dust, vermin proof, duly powder coated and wired as per standard engineering practice ac distribution board indoor type, floor mounted made out of 14/16 swg crc sheet, dust, vermin proof, duly powder coated and wired as per standard engineering practice lightening arrestors a 11 kv l.a. set station type polymer b 33 kv l.a. set station type polymer control cable a 2.5 mm2 cu 2-core b 2.5 mm2 cu 4-core c 2.5 mm2 cu 8-core d 2.5 mm2 cu 12-core post insulator a 22 kv post insulators polymer b 33 kv post insulators polymer 33kv disc insulators polymer 33kv pin insulators for panther polymer 33kv pin insulators for wolf polymer 33kv pin insulators for dog polymer 11 kv vacuum interupter bottle a g.e.c. b crompton greaves c allind d alstrom e bhel f schneider g stelmec h yamuna i megawin h.t. tape 33 kv single phase xlpe cable 630 mm2 11 kv 3-core xlpe cable 400 mm2 11 kv 3-core xlpe cable 300 mm2 11 kv 3-core xlpe cable 240 mm2 11 kv 3-core xlpe cable 185 mm2 twin core 16 mm2 pvc cable al 11 kv xlpe cable 120mm 3- core g.i. strip 25x3 mm pvc cable 3.5 core armoured x35 sqmm copper bus bar d.o set chain mesh single tension fittings for acsr dog conductor single tension fittings for acsr wolf, conductor, single tension fittings for acsr panther conductor, pannel heater pcc pole 11 mtrs pcc pole 9 mtr. pcc pole 8 mtr. st pole 16 mtrs st pole 13 mtrs st pole 11 mtrs st pole 9 mtr st pole 8 mtr. g.i pipe 11 kv link set l.t cable 3.5 core 35 mm barbed wire exhaust fan heavy duty 18 of reputed make single pulley yard light led 100 watts yard light led 250 watts alumunium bus bar alumunium jointing sleeve g.i. plate ms plate 33 kv la porcelain oil tempature meter oti winding temprature meter wti 11 kv pt set 11 kv/110 volt energy meter 3-phase 4-wire 11 kv/110 volt spring charge motor for 11 kv vcb make delco or reputed is specifications hrc fuse 2 amps for 11 kv pt digital ampps meter for 11 kv panel voltmeter for 11 kv panel aluminum ladder come along clamps for acsr dog come along clamps for acsr wolf come along clamps for acsr panther

corporations/Associations/Others

CTN :21080189 c-icon21 Jun, 2021 Tender Value : NA
l-iconGhaziabad - Uttar Pradesh Tender For connection issue and electrification work at various place cartage of 03 no. pcc and 74 no. st pole from store center sahibabad/ghaziabad to different site of work including loading & unloading at both side. cartage of all line materials e.g. top channel, dropper channel, s/s channel, holding clamp, 11 kv pin insulator, stay set etc. and other line material from store center sahibabad/ghaziabad to different site of work including loading & unloading at both side. cartage of 11/0.4 kv t/f from store center sahibabad/ghaziabad to different site including loading & unloading at both end. a 25/63/100 kva t/f cartage of 11/0.4 kv t/f from store center sahibabad/ghaziabad to different site including loading & unloading at both end. b 250/400 kva t/f dismantling & cartage of old & used 25/63/100/250/400 kva t/f from different site to je store/store center sahibabad/ghaziabad including loading & unloading at both end. erection of pcc single pole after digging of pits in proper size 1500x600x500 and fixing of all material on pole & refilling by earth, complete work in all respect. erection of st double pole after digging of pits in proper size and fixing of all material on pole & refilling by earth, complete work in all respect as per respo norms. construction of t/f plinth with cement, concrete, sand and bricks duly plaster around the plinth complete work in all respect as per respo norms. laying, stringing and proper sagging of acsr dog conductor of 11 kv/lt line, after cartage from store center sahibabad/ghaziabad to site including loading & unloading at both end. complete work in all respect as per respo norms. grouting of stay set after digging of pits in proper size and grouting in ratio 1:4:8 with cement, sand and concrete as per norms of nigam. complete work in all respect as per respo norms. concreting of pole as per norms. providing & fixing of stone pad. laying of 11 kv xlpe cable after digging of trench in proper size size 11 kv xlpe cable 70x3, 120x3, 185x3, 240x3 mm2. after cartage from store center sahibabad to site including loading & unloading at both end. complete work in all respect as per respo norms. construction of t/f cage fencing with ms flat & wire as per respo norms complete work in all respect. fixing of cable jointing kit of different size 11 kv xlpe cable 70x3, 120x3, 185x3, 240x3 mm cable box complete work in all respect as per respo norms. laying of abc conductor of size 120x3, 95x3, 50x3, 185x3, 16x1 mm after cartage from store center sahibabad to different side including loading & unloading at both end and complete work in all respect. fixing of metering cubical on foundation with nut & bolt after cartage of cubical meter from store center sahibabad to different site of work including loading & unloading at both side. complete work in all respect. fixing of t/f of size 25/63/100 of different capacity on dp structure complete work in all respects. fixing of t/f of size 250/400 kva capacity on dp structure complete work in all respects. providing & fixing lt db box on pole and complete work in all respect as per respo norms. water level earthing of 11/0.4 t/f with suitable gi pipe 250/400 kva t/f including material, complete work in all respect as per respo norms. aneutral earthing t/f water level earthing of 11/0.4 t/f with suitable gi pipe 250/400 kva t/f including material, complete work in all respect as per respo norms. abody earthing t/f providing & fixing of sundary items for double pole a holding clamp providing & fixing of sundary items for double pole a nut & bolts laying of xlpe cable of different size 11 kv 70x3, 120x3, 185x3 mm cable through trench less system at road crossing through hdpe pipe os suitable dia complete work in all respect as per respo norms.

State Government

CTN :21045455 c-icon21 Jun, 2021 Tender Value : NA
l-iconChiplun - Maharashtra Tender For contract for pws at durgwadi khurd mainkond kadamwadi sub estimate no.1 swith house excacation for foundation / pipe trenches in by blasting in soft rock and old masonry including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. providing and laying in situ cement concrete of trap/granite/quartzite/gneiss metal for rcc work in foundation like raft grillage strip foundation and footing of rcc columns and steel stanctions including normal dewating fromwrok compaction finishing and curing etc complete excluding ms or tor reinforcemen providing dry trap/granite/quartzite/gneiss, rubble stone soling in 15cm to 20 cm thick layers including hand packing and compacting, royalty charges etc. complete providing laterite stone msonry in cement mortar 1:6 in founation and plinth of inner wall including racking out joints wher plastering is to done watering and scaffolding etc complete providing laterite stone msonry in cement mortar 1:6 in superstructer of inner wall including racking out joints wher plastering is to done watering and scaffolding etc complete providing and fixing factory made precast door/ window frames with shutter as per requirement and as per specification without fanlight including holdfasts carting and erecting in position etc complete door providing and fixing factory made precast door/ window frames with shutter as per requirement and as per specification without fanlight including holdfasts carting and erecting in position etc complete window providing and fabricating structural steel work in roller sections like joist channels angles tees etc complete providing and fixing zincalume profiles sheets for roofing including etc complete providing internal cement plaster 20mm thick in a single coat in cement mortar 1:3 without neeru fininsh to stone masonry surface in all position including scaffolding racking out joints providing groove at joints masonry etc complete providing and applying two coats waterproof cement paint of approved manufacturar and approved colour to the plastered surface including scaffolding and necessary preparation the surface etc complete pumping machinery providing errecting and giving test of sub mersible pump set conforming pump set conforming to is 8034 an motor conforming to is 9283 with water proof winding pump shall be suitable fo various delivery head and discharge with stainless steel shaft mortor suitable for working on 415+10% 3ph 50hza c supply with cable guard, thrust carbon/firbre bearing to with stand entire hydraulic thrust. the pump sets hall be suitable for direct coupling with suitable suction straniner pump should have suitable discharge out let as per manufactures desing. antithrust stream lined on return valve shall be provided with the pump 3 m submersible copper conductor cable in single/double run and 2 pair of erection dclamps 65mm width 10mm thick shall be provided witheach pump submersible pump 150 mm dia with bronze impeller providing and fixing ci b/f sluice suitable type of pressure relief valve/o velocity valve, reflux valve of following dia including all taxes central and local transportation upto site of work unloading stacking etc complete a 50mm dia sluice value b 50mm dia nr valve providing errecting and giving testing of vertical drop pipe 80mm dia gi medium class in1.5m or 1 m in length asper site condition with heavy duly flanges etc complete asper detailed specification providing and erecting flat flexible sub mersible cable with copper condurctor pvc insulated and pvc sheathed etc complete providing errecting, commission and testing of floor mounting type lt pannel board asper detailed specifcating skelton type providing installing and commissioning ternal electrification arrangemetn as directed by engineer in charge providing and errecting triple spur gear type chain pully block suitable for capacity as below with 6m lift complete with load chain andhand chain suitable for above lift ested 50% over load as per is 3832 carrying isi mark etc complet providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by engineer-incharge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paints and over it two coats of oil painting, etc. complete providing and fixing m.s. chequerred plate flooring of following thickness supported on m.s.angles 25 x 25 x 5 mm size including welding, cutting and fabricating the plate to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by engineer-in-charge providing and fixing g.i. pipe railing having 1.0m height consisting 50 x 50 x 6 mm thick m. s. angles as verticals at 1.5 m c/c, distance and additional posts at every corner bends to curved shape with 3 rows of 25 mm dia g.i. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete risin main excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. com- plete. providing and supplyin gi pipes and special of following class and dia in proper position grade and alignment as directed including conveyance to site of work cost of jointing material labour giving satisfactory hydraulic testing including paying eil inspecting charges etc complete a80mm dia m 8.64kg/m b50mm dia m 5.16kg/m c65mm dia m 6.63kg/m lowering laying and jointing gi pipes and specials of follwong class and diameter including conveyance from stores to site of works all labour giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by engineer in charge a80mm dia m 107.00+10% b50mm dia m 65.00+10% c65mm dia m95.00+10% providing and laying in situ, following grades of c.c. of trap /granite / quartzite / gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete. item no.7c-providing and testing varnished plank 20 mm thick fixed towall cr on provided pannel board for fitting mseb connection with necessary materials supports etc. complete. providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete.as per is:4984-2016, the pipes upto 110 mm dia.should be supplied in coil form only.hdfc pe 100dia 75mm 8kg/sqcm lowering, laying and jointing h. d. p. e./m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like lectrofusion machine, electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge hdfc pe 100dia 75mm 8kg/sqcm providing and supplying isi mark ci d/f reflux valves non-return valves of following dia including all taxes central and local railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking etc complete 1 20mm dia lowering laying and jointing in position cid/ f reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material including nut bolts and giving satisfactory hydraulic testing etc complete a 20mm dia refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete. providing and fixing in position m.s. air valve boxes fabri- cated with 2 mm thick m.s. plate, 30 x 30 x 3 mm size m.s. angle frame, concreting in m-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc.complete as directed by engineer-in-charge. sub estimate no 4 designing aesthetically and constructing rcc ground service reservoirs/ rcc sumps in m-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab/ or dome, 20 mm thick cement plaster with water profing compound in cm 1:3 proportion, to inside face of the container, including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of c.i./ m.s.d / f. pipes specials and valves of given disameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirments and detailed specifications. 3entire structure shall be in m-300 only 4the scope of pipe assembly work shall be up to 5m beyond outside face of the wall cost of pipes valves and specials is not included in the rate bu labour cost for laying and jointing is inclued 975%part rate shall be payable for reinforcement concrete and plastering item of all types of gsr and sumps till satisfactory hydraulic testing for water tightness test if given cap 19000 lit item no.2- providing isi mark g.i. pipes of following class and dia including all local and central taxes, octroi, inspection charges etc complete 80mm dia gi 8.64kg/m item no.3-providing double flanged sluice valve confirming for is-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc.complete. 80 mm dia sluice valve pn-1 sub estimate no 5 distribution system excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.. excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. com- plete. providing and supplyin gi pipes and special of following class and dia in proper position grade and alignment as directed including conveyance to site of work cost of jointing material labour giving satisfactory hydraulic testing including paying eil inspecting charges etc complete a80mm dia m 8.64kg/m b50mm dia m 5.16kg/m c65mm dia m 6.63kg/m lowering laying and jointing gi pipes and specials of follwong class and diameter including conveyance from stores to site of works all labour giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by engineer in charge a80mm dia m 107.00+10% b50mm dia m 65.00+10% c65mm dia m95.00+10% item no.1 -providing & supplying in standard lengths polyethelene pipes, conforming to is 4984/14151/12786/ 13488 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc. 90mm dia hdpe pipe pe - 100 - 6 kg/cm2 75 mm dia hdpe pipe pe - 100 - 6 kg/cm2 63 mm dia hdpe pipe pe - 100 - 6 kg/cm2 item no.5- lowering laying & jointing h.d.p.e. pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with jack/hydraulicjack/vutt fusion machine etc. complete. with all maerial, labours as directed by engineer in charge including given satisfacory hydraulic test. 90mm dia hdpe pipe pe - 100 - 6 kg/cm2 75mm dia hdpe pipe pe100 - 6 kg/cm2 63 mm dia hdpe pipe pe100 - 6 kg/cm2 providing and laying in situ 1:2:4 m-150 grade of cc of trap/granite/quartzite/gniess metel for foundation an bedingincluding dewatering from work compating and curing finishing etc complete providing and supplying isi mark ci d/f reflux valves non-return valves of following dia including all taxes central and local railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking etc complete asluice value i80mm ii65mm iii50mm dia lowering, laying and jointing in position following c.i.d./f. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. asluice value i80mm 1580.00+176.00+10% ii65mm 1137.00+127.00+10% iii50mm 757.00+85.00+10% refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete. provision for msedcl charges
 Loading, Please wait...

Connect us via What's Up